截齿截割煤体变形破坏过程数值模拟研究

采用应变软化的模型,使用连续介质快速拉格朗日分析法(FLAC,FastLagrangianAnaly-sisofContinue)进行数值模拟计算;研究截齿截割作用下煤体变形破坏过程;分析各种工况下不同参数对煤体塑性区、最大位移、最大主应力、最大剪应力的影响。研究表明:截割力与塑性区大小成正比,位移、剪应力、主应力随截割力增大而增大;截深与塑性区大小成反比;截割角度与塑性区面积关系密切,试验用煤体最佳截割角度为5°左右;截割速度增加,塑性区面积减小;通过分析截割动态过程,得到位移矢量图及剪应变等值线图,发现截割过程中煤体的破坏是拉、剪联合作用的结果,以剪破坏为主。     

Modeling potential herbicide loss to surface waters on the Swiss plateau

Lack of sufficiently detailed data often limits the applicability of complex transport-reaction models for estimating potential herbicide loss to surface waters. Therefore, there is also a need for simple models that are easy to apply but still capture the main features of the underlying processes.In this study, a simple regression model was developed to assess the vulnerability of catchments in the Swiss Plateau to diffuse herbicide loss to surface waters. The model is designed as a screening tool to rank the catchments in a relative sense and not to calculate Predicted Environmental Concentrations (PEC) of pesticides. The main goal is to capture two dominating factors controlling diffuse herbicide transport into streams and rivers. These factors are herbicide application and fast flow processes that are mainly responsible for herbicide transport. In a first step vulnerability of sites to herbicide loss is estimated based on site-specific conditions irrespective of actual herbicide application. In the second step, this vulnerability assessment is combined with actual herbicide application data to estimate the potential herbicide loss.The fast flow index (FFI), derived from discharge data using a base flow separation method, was applied as a proxy for the amount of fast flow occurring. The influence of catchment attributes (including topographic, climatic and soil data) on the FFI was analyzed using a multiple regression approach based on data from 57 catchments of the Swiss Plateau. By combining regression analysis with mechanistic knowledge, a two factor non-linear model based on river density and soil permeability as dominant input factors was selected as the best model for FFI prediction given the available data. Higher dimensional models had to be excluded because the strong correlation between the potential input factors led to unrealistic dependences while only minimally improving the quality of the fit.The spatial pattern of the predicted FFI as a measure for the vulnerability to diffuse herbicide losses shows a clearly increasing trend from the western to the eastern part of the Swiss Plateau and towards the pre-alpine/alpine regions in the south.In general the pattern of herbicide use corresponds to site conditions typical of a low FFI. However, the spatial analysis revealed exceptions, namely areas in which high actual herbicide use coincides with a high FFI.Despite the uncertainties in the model, this simple approach seems to be useful for supporting site-adapted agricultural practice whenever the higher accuracy of more detailed models is not required or too expensive to achieve. In addition, in combination with data on actual herbicide application, it can support the design of monitoring strategies by identifying critical areas of actual herbicide loss.     

Scale effects on hydrogen–air fast deflagrations and detonations in small obstructed channels

An experimental study of flame propagation, acceleration and transition to detonation in hydrogen–air mixture in 2-m-long rectangular cross-section channel filled with obstacles located at the bottom wall was performed. The initial conditions of the hydrogen–air mixture were 0.1 MPa and 293 K and stoichiometric composition (29.6% H₂ in air). The channel width was 0.11 m and blockage ratio was 0.5 in all experiments. The effect of channel geometrical scale on flame propagation was studied by using four channel heights H of 0.01, 0.02, 0.04, and 0.08 m. In each case, the obstacle height was equal to H/2 and the obstacle spacing was 2H.

The propagation of flame and pressure waves was monitored by four pressure transducers and four ion probes. The pairs of transducers and probes were placed at various locations along the channel in order to get information about the progress of the phenomena along the channel.

As a result of the experiments, the deflagration and detonation regimes and velocities of flame propagation in the obstructed channel were established.     

Alternative method to prevent thermal runaway in case of error on operating conditions continuous reactor

Thermal runaway was studied in a continuous tubular pilot reactor under steady-state regime. Different accident scenarii were conducted by making some errors on reactant concentrations and/or temperature feed. To prevent thermal runaway, control by direct contact by solvent injection was used at different reactor locations. This injection allowed controlling the maximum reaction temperature. A simplified analytical method to estimate the maximum reaction temperature along the reactor was used.Benefit of this control method was the diminution of computational time. Furthermore, by injecting solvent to control maximum reaction temperature, there is no need to shut down the unit. The control method was validated experimentally.     

快速模拟退火组合优化法在区域水环境质量评价中的应用

以地表水环境质量准标为基础,设定水体污染物的基准值,构建用于水体的一种环境质量评价的模型,利用快速模拟退火组合优化法对相关参数进行优化,而得到一个对多种水污染物都适用的综合水体环境质量评价指数公式。该公式形式简单,计算容易,评价结果具有可比性。     

海啸波近岸共振响应的数值模拟及分析

应用有限差分方法求解非线性浅水长波方程,建立了海啸波产生和传播的二维数值模型;对太平洋地震引起的夏威夷群岛海啸波进行模拟,并将模拟结果和测站实测值进行比较,验证了模型的正确性。利用快速傅里叶变换对数值模拟结果进行谱分析,得到整个计算区域的能量谱分布,并给出了发生能量聚集的位置及相应的谱峰周期。讨论了海啸波传播到近岸时可能产生的共振响应现象,发现海啸波和近岸的共振响应不仅与近岸复杂地形有关,还与海啸波传播到近岸时的波浪入射方向有关。     

一种新型快速密闭装置的研究及应用

介绍了快速密闭装置的化学组成、性能、特点及其作用 ,在实际矿井中进行了对自然发火巷道的封闭和模拟火灾的封闭应用试验 ,研究了快速密闭的贮存稳定性。结果表明 ,该快速密闭装置贮存稳定性好 ,使用该装置建立密闭墙 ,轻便快捷、密闭性优良。试验研究的结果为快速密闭在煤矿井下的推广及应用 ,提供了可靠的依据     

偶氮染料4BS光解动力学和总氮脱除的初步研究

采用单独紫外光氧化降解偶氮染料直接耐酸大红(4BS),研究了不同因素对4BS光解效果的影响,并初步考察了光解对4BS溶液总氮的去除效果. 结果表明,单独紫外光氧化法对4BS及溶液中的总氮有一定的去除效果. 在非强碱性条件下,4BS的光解过程符合准一级反应动力学模型. 速率常数随紫外光强的增强而增大,并且与初始ρ(4BS)呈负相关关系. 溶液pH是影响光解反应的重要因素,速率常数随pH升高而增加显著,强碱性条件下光解速率最快. 光解对溶液中总氮的去除分为三步,含氮结构的发色基团易吸收紫外光,在反应初期被降解而生成气态含氮物,生成的中间产物比较稳定,需要经过一段时间的能量积累才能继续降解,从而总氮的去除率再次升高.      

快速检测痕量铜的光电型传感器的研制

利用铜对葡萄糖氧化酶的抑制作用,以及葡萄糖氧化酶-辣根过氧化物酶-葡萄糖(Glu)-邻联甲苯胺(OT)偶联反应体系生成蓝色底物的原理,将Glu与OT固定化制成试纸条,插入自制的便携式单色光反射计,组装出检测铜的光电型传感器。当铜的质量浓度范围为1 mg/L～100 mg/L时,光反射强度值与铜的质量浓度呈良好的线性关系。在优化的试验条件下,该方法的检测限为0.064 mg/L,检测时间为5 min。     

压力脉冲波法复杂天然气管道堵塞检测实验研究*

为了解决复杂天然气管道堵塞定位难题,快速定位出堵塞位置,提出利用压力脉冲波法检测复杂管道堵塞。改造搭建长18.1 m、包含17个三通结构的压力波堵塞检测实验台,进行不同堵塞率以及气液混输管道的堵塞定位实验。结果表明:管道三通会引起频率范围为150~200 Hz的高频反射波,利用FFT谐波变换方法可以有效地对原始信号进行滤波分析,更利于对堵塞定位分析。在堵塞率100%时,定位误差为1.07%;在堵塞率50%时,定位误差最大,达到1.93%;对于含液率8%的气液混输管道,100%堵塞时,定位误差为0.48%。研究结果有效地证实了压力脉冲法检测复杂输运管道堵塞的可行性,可为该方法的现场应用提供指导和数据支撑。